Radio RIG Alinco DR-135T/EMKIII VHF
Features of DR-135T/EMKIII
- Revised NEW circuit to be compliant to RoHS/Lead-free order in EU.
- Voice-only FXE-version available (European model only, EJ-41U/47U not usable).
- EJ-41U internal TNC board is available as an option for 1200/9600bps packet
- 50 watts, H/M/L power settings
- 100 memory channels
- Front panel data port
- Rear panel DSUB9 computer connection
- No need to remove mic for packet operation
- Ignition key on/off feature
- CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
- Clean, clear Alinco audio
- Super-wide 7 character alphanumeric display
- Wide and narrow FM modes (16K0 & 8K50F3E)
- Theft alarm feature
- A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
- Stays in mode you select (voice/packet) through
power off cycles - Ten autodial memories
- and more....at Low Alinco price!
Specifications
| Genaral | |||||||
| Frequency range |
|
||||||
| Operating mode | 16K0F3E (FM)/8K50F3E (Narrow-FM) F1(9600bps)/F2(1200bps)/10F3 * 1 /A3E (RX only DR135TMkII) |
||||||
| Channel steps | 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz | ||||||
| Memory channel | 100 channels + 1 quick recall (CALL) | ||||||
| Antenna impedance | 50ohm unbalanced | ||||||
| Frequency stability | +/- 2.5ppm TCXO | ||||||
| Power supply requirement | 13.8V DC +/- 15% negative ground | ||||||
| Current drain | Approx. 11.0A TX High Approx. 0.4A squelched |
||||||
| Usable temperature range | -10 - +60c (14 - 140F) | ||||||
| Dimensions (w/o projection) | 142(W) x 40(H) x 174(D) mm 5.59"(W) x 1.57"(H) x 6.85"(D) |
||||||
| Weight | Approx. 1.0Kg (35.3oz) | ||||||
| CTCSS tone | encoder/decoder 39 tones | ||||||
| Digital Coded Squelch | encoder/decoder 104 codes | ||||||
| Transmitter | |||||||
| Output power | Approx. 50W (HI) Approx. 20W (MID) Approx. 5W (LOW) |
||||||
| Modulation system | Variable reactance frequency modulation | ||||||
| Spurious emission | Less than -60 dB | ||||||
| Maximum frequency deviation | +/- 5 KHz (FM) / +/- 2.5 KHz (NFM) | ||||||
| Receiver | |||||||
| Receive system | Double-conversion superheterodyne | ||||||
| Sensitivity (-12dB SINAD) *2 | Less than -16.0dBu | ||||||
| Intermediate frequency | 1st IF 21.7 MHz, 2nd IF 450 KHz | ||||||
| Selectivity *2 | -6dB: 12KHz or more -60dB: 28KHz or less (FM) -6dB: 6KHz or more -60dB: 16KHz or less (NFM) |
||||||
| Audio output power | More than 2W(8ohm 10%THD) | ||||||
| Note: | * 1 Optional units required * 2 Typical within the amateur radio band(s). |
||||||
| Optional Accessories | |||||||
| Microphones | EMS-53 Plain microphone EMS-57 DTMF/Remote microphone |
||||||
| Separation Cable | |||||||
| Digital voice unit | EJ-47U | ||||||
| TNC unit | EJ-41U | ||||||
| DC Power supply | DM330MVT (120VAC) 30A switching DM330MVE (240VAC) 25A switching |
||||||